| Content | The change in season can bring a lot of bugs and insects. These sometimes annoying creatures can disturb the peace and cause serious health problems. A mosquito killer bulb is a proper and effective solution to this problem.How it worksInsects are drawn into a high voltage power wire mesh grid by an ultraviolet emitting light bulb, where they are electrocuted. The light bulb and electrical cables are protected by a plastic or grounded metal cage.DesignThe bulb is designed with your satisfaction in mind, so it has three different operating modes that you can control with your switch. Mode 1: Only the LED light (the lower white part) is turned on; this mode is useful when you only need the light. Mode 2: Only the Zapper (the purple part in the middle) is turned on. It contains an attractant that draws insects to the electrified grids, where they are instantly killed. (You use it when you want to sleep while at the same time it kills those buzzing mosquitoes.) Mode 3: In this mode, both the light and the zapper are active at the same time.InstallationThe bulb is suitable for use both indoors and outdoors, as long as they are rain-protected. | MikroTik hAP ac² Wireless Router
The hAP ac² is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE modem, and device supports IPsec hardware acceleration.
New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided. | With a compact design and integrated 24V PoE passthrough, airCube AC is a high-performance home WiFi access point made to interoperate with airMAX CPE devices, with remote management by UISP.
Features:
802.11ac 2x2
24V PoE in and out or power in via included PSU
UISP Mobile app support for fast setup
UISP support for remote network management
UISP mobile app for Android and iOS | The “Improvise. Adapt. Overcome.” mindset can be very helpful, but sometimes you simply need a device that works and solves the problem without additional tinkering. The CCR2004-1G-12S+2XS does just that – forget about all connectivity troubles and expand your setup in any way you please. This handy router features 12 x 10G SFP+ and 2 x 25G SFP28 ports.
CCR2004-1G-12S+2XS is our router with the most powerful single-core performance so far. It provides incredible results in single tunnel (up to 3.4 Gbps) and BGP feed processing.
Be prepared for anything: 10G, 40G and now 25G! Paired with such MikroTik multiport products as CRS317-1G-16S+RM, CRS312-4C+8XG-RM and CRS326-24S+2Q+RM, your networking setup will know no bounds. Performance-wise, CCR2004-1G-12S+2XS is on par with the renowned CCR1009/CCR1016 routers. And with dual redundant power supply you can forget about unexpected downtime! With its elaborate port configuration, the new CCR2004-1G-12S+2XS is the perfect addition to any professional networking arsenal – it will save you tons of time in some tricky situations! Size of RAM in RouterOS v6 1792MB ECC / RouterOS v7 4GB ECC | The EdgeRouter 12 is a high-performance Gigabit Router with PoE flexibility. With increased performance over the previous generation of routers, the EdgeRouter 12 delivers up to 3.4 million pps for 64-byte packets. Ten Gigabit Ethernet ports offer copper connectivity, while two SFP ports offer fiber connectivity. The EdgeRouter 12 supports Layer-2 switching and scalable configuration using EdgeOS or the Ubiquiti Network Management System (UNMS). Product Specs
Performance: 3 million+ pps
CPU count: 4
Core Frequency: 1 GHz
PoE: 24V Passive PoE
Cooling: Passive | With a compact design and integrated 24V PoE passthrough, airCube ISP is a low-cost home WiFi access point made to interoperate with airMAX CPE devices, with remote management by UISP.
Features:
802.11n 2x2
24V PoE
UISP Mobile app support for fast setup
UISP support for remote network management
UISP mobile app for Android and iOS
Note. A PSU is not included with airCube ISP. airCube ISP can be powered by a 24V passive PoE PSU, or via 5V micro USB. |
