Description

Tripp Lite APSX6048VRNET 6000W APS X Series 48VDC 208/230V AC Inverter/Charger

Tripp Lite APSX6048VRNET 6000W APS X Series 48VDC 208/230V AC Inverter/Charger

Product Description

Specifications

OVERVIEW
UPC Code 037332137838
OUTPUT
Nominal Output Voltage(s) Supported 208V; 230V
Frequency Compatibility 50 / 60 Hz
Output Receptacles Hardwire
Output (Watts) 6000
Continuous Output Capacity (Watts) 6000
Peak Output Capacity (Watts) 12000
Output Voltage Regulation LINE POWER (AC): Maintains 208/230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 208/230 VAC (+/-5%).
Output Frequency Regulation 50/60 Hz (+/- 0.3 Hz)
INPUT
Nominal Input Voltage(s) Supported 208V AC; 230V AC
Recommended Electrical Service DC INPUT: Requires 48VDC input source capable of delivering 138A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 250A minimum battery system fusing is recommended.
Input Connection Type DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate
Voltage Compatibility (VAC) 208; 230
Voltage Compatibility (VDC) 48
BATTERY
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC) 48
Battery Pack Accessory (Optional)  98-121 sealed lead acid battery (optional)
Battery Charge Selectable 23 / 90 amp
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Overvoltage Correction Input voltages above 252V are automatically reduced by 9% (230V) / Input voltages above 235/245V are automatically reduced by 10% (208V)
Brownout Correction Input voltages from 208V -189V are automatically boosted by 11% (230V) / Input voltages from 188V-166V are automatically boosted 12% (208V)
Severe Brownout Correction Input voltages from 188V – 171V are automatically boosted by 26% (230V only)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus \”auto/remote\” setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads. Configuration dipswitches set unit voltage, frequency, transfer-time, battery type, and charger-related settings.
PHYSICAL
Shipping Dimensions (hwd / cm) 40.64 x 36.83 x 59.06
Shipping Weight (kg) 59.51
Unit Dimensions (hwd / cm) 25.5 x 49.5 x 22.71
Unit Weight (kg) 48.31
Cooling Method Dual multi-speed fans
Material of Construction Metal
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
COMMUNICATIONS
Communications Interface Contact closure; DB9 Serial
SNMP Compatibility Optional SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, SSH, telnet or Internet.
LINE / BATTERY TRANSFER
Transfer Time (Line Power to Battery Mode) Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications
Low Voltage Transfer to Battery Power In 230V AC \”auto\” mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable to 180V). In 208V AC \”auto\” mode, inverter/charger switches to battery mode as line voltage drops to 165V (user adjustable to 175V)-see manual
High Voltage Transfer to Battery Power In 230V AC \”auto\” mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable to 270 – see manual), In 208V AC \”auto\” mode, inverter/charger switches to battery mode as line voltage increases to 235V (user adjustable to 245V-see manual)
SPECIAL FEATURES
TVSS Grounding Main grounding lug connects inverter/charger to earth or vehicle chassis ground
Generator Start Compatibility RJ-11 port connects to a generator with user-supplied cable to automatically cycle generator when battery level is low
Battery Temperature Sensor RJ-11 port connects to optional battery temperature sensor cable to regulate the charging system based on battery temperature
CERTIFICATIONS
Certifications Tested to EN62040-1 (CE), EN62040-2 (EMC), RoHS compliant
WARRANTY
Product Warranty Period (Worldwide) 2-year limited warranty

Reviews

There are no reviews yet.

Be the first to review “Tripp Lite APSX6048VRNET 6000W APS X Series 48VDC 208/230V AC Inverter/Charger”

Your email address will not be published. Required fields are marked *